| |
Discription: |
| |
| |
Water Cooled Aftercooler, Maximum Compressor Power 60 HP, Maximum Flow @ 100 PSI 310 GPM, Air Inlet/Outlet NPT 2 1/2 Inches, Water Inlet/Outlet NPT 1 Inch, Cooling Surface 18.0 Square Feet, Length 50 5/16 Inches, Height 6 1/4 Inches, Width 5 1/4 Inches |
|
| |
Features: |
| |
| |
Compressed air and gas aftercoolers |
| |
water and air cooler |
| |
pipeline aftercooler |
| |
all brass hubs and shell assemblies |
| |
reduce or eliminate galvanic and other types of corrosion |
| |
copper nickel tubes available for sea water service |
|
| |
Ratings: |
| |
| |
Tubes: 250 psi
|
| |
Shell 250 psi |
| |
Operating Temperature 350° F |
|
| |
Materials: |
| |
| |
Tubes Copper
|
| |
Shell Brass |
| |
End Hubs brass |
| |
end bonnets cast iron |
| |
baffles brass |
| |
mounting brackets (optional) steel |
| |
gaskets: nitrile rubber |
| |
nameplate: aluminum foil |
|
|
 |
| |
|
| |
| |
Tech Specs: |
| |
| Item |
|
Water Cooled Aftercooler |
| Max. Compressor HP |
|
60 |
| Max. Flow CFM @ 100 PSI |
|
310 |
| NPT Inlet/Outlet Air (In.) |
|
2 1/2 |
| NPT Inlet/Outlet Water (In.) |
|
1 |
| Max. Pressure (PSI) |
|
250 |
| GPM Min. |
|
3 per 100 CFM |
| Max. Temp. (F) |
|
350 |
| Cooling Surface (Sq.-Ft.) |
|
18.0 |
| Tube Material |
|
Copper |
| Shell Material |
|
Brass |
| Baffle |
|
Internal |
| End Bonnet |
|
Cast Iron |
| Length (In.) |
|
50 5/16 |
| Width (In.) |
|
5 1/4 |
| Height (In.) |
|
6 1/4 |
| Includes |
|
Mounting Feet |
|
|
| |
Additional Information: |
| |
- Water-Cooled Aftercoolers
- Remove damaging water, oil, and contaminants from compressed air systems.
- For best performance, install aftercoolers so water flows in opposite direction to compressed air. Highly efficient cooler is built with corrosion-resistant copper tubes, brass shell, and internal baffles. Mounting feet at both ends.
- 3 GPM of cooling water needed per 100 CFM of air
- Cast-iron end bonnets are removable for servicing
- 250 psi max., 350 DegreeF max.
|
|
| |
|
